Netgear WG602V4 사용자 설명서
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
Installation and Configuration
2-13
v1.0, June 2007
•
Use WPA-PSK or WPA2-PSK. Wi-Fi Protected Access (WPA/WPA2) data encryption
provides data security. WPA-PSK will block eavesdropping. Because this is a new standard,
wireless device driver and software availability may be limited. However, WPA/WPA2 is not
available in bridge mode (see
provides data security. WPA-PSK will block eavesdropping. Because this is a new standard,
wireless device driver and software availability may be limited. However, WPA/WPA2 is not
available in bridge mode (see
).
Configuring Wireless Security
To configure the wireless security options of your wireless access point:
1. Click Security Settings under Setup on the main menu of the browser interface. The Security
Settings screen will appear.
2. From the Security Type pull-down window, select the security WEP/WPA Security Type you
want to employ.
•
WEP – If selected, choose the appropriate Authentication Type from the pull-down
menu. The default is Mix (see
menu. The default is Mix (see
complete configuration details).
–
Mix – If selected, a client can connect using either “Open” or “Shared” authentication
type. (Not available in Client Mode.)
type. (Not available in Client Mode.)
–
Open System – If selected, you have the option of using WEP encryption, or no
encryption. This is the default.
encryption. This is the default.
–
Shared Key – If selected, you must use WEP; at least one shared key must be entered.
•
WPA-PSK – If selected, you must use TKIP encryption and a WPA passphrase (Network
key) See
key) See
for complete
configuration details.
Figure 2-11