Netgear WG602V4 사용자 설명서
NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
2-18
Installation and Configuration
v1.0, June 2007
Configuring WPA2-PSK Wireless Security
Not all wireless adapters support WPA2. Furthermore, client software is required on the client.
Make sure your client card supports WPA2. Consult the product document for your wireless
adapter and WPA2 client software for instructions on configuring WPA2 settings.
Make sure your client card supports WPA2. Consult the product document for your wireless
adapter and WPA2 client software for instructions on configuring WPA2 settings.
To configure WPA2-PSK:
1. From under the Setup menu in the left-hand panel, click Security Settings.The Security
Settings screen will display.
1. From the Security Type pull-down menu, select WPA2-PSK. By default, the Encryption
Type will display AES.
2. In the Password Phrase field, enter a word or group of 8-63 printable characters.
3. Click Apply to save your settings.
Configuring WPA-PSK/WPA2-PSK Wireless Security
Not all wireless adapters support WPA/WPA2. Furthermore, client software is required on the
client. Make sure your client card supports WPA/WPA2. Consult the product document for your
wireless adapter and WPA/WPA2 client software for instructions on configuring WPA/WPA2
settings.
client. Make sure your client card supports WPA/WPA2. Consult the product document for your
wireless adapter and WPA/WPA2 client software for instructions on configuring WPA/WPA2
settings.
Figure 2-14
Note: If you use a wireless PC to configure WPA settings, you will be disconnected
when you click Apply. Reconfigure your wireless adapter to match the new
settings or access the wireless access point from a wired PC to make any
further changes.
settings or access the wireless access point from a wired PC to make any
further changes.