Fujitsu P2X0-0202-01EN 사용자 설명서
All Rights Reserved, Copyright © FUJITSU LIMITED 2007
34
3.2 ETERNUSmgr for Windows®
ETERNUSmgr User Guide -Introduction- P2X0-0202-01EN
Check the log files to see if ETERNUSmgr for Solaris OS and Linux is communicating with the target
devices after automatic startup.
devices after automatic startup.
3.2
ETERNUSmgr for Windows®
Once installed, ETERNUSmgr for Windows® is registered as a service with the following conditions:
• Service Name: STXPOLL
• Condition: not displayed (=shutdown)
• Startup: automatic
• Condition: not displayed (=shutdown)
• Startup: automatic
This service will start up automatically the next time the server is started
After installation, certain parameters must be set before you can use ETERNUSmgr. See
for details on how to perform these settings.
Once the necessary parameters have been set, follow the instructions in
to startup ETERNUSmgr manually.
3.2.1
Starting Up ETERNUSmgr
Perform the following to manually startup ETERNUSmgr for Windows®:
Procedure
1
Select the [STXPOLL] service from [Services] under [Administrative Tools] on
the [Control Panel], and click the [Start] button.
the [Control Panel], and click the [Start] button.
After ETERNUSmgr has started up, you need to view the log file to confirm whether or not ETER-
NUSmgr is in communication with the target device. If using the E-mail notification function, also check
that E-mail notification of ETERNUSmgr startup and changes in the target device states is received.
ETERNUSmgr startup can be confirmed by:
NUSmgr is in communication with the target device. If using the E-mail notification function, also check
that E-mail notification of ETERNUSmgr startup and changes in the target device states is received.
ETERNUSmgr startup can be confirmed by:
• In the control panel or in management tool services, make sure that "STXPOLL" is acti-
vated.
• Checking the log, and making sure that communication with the target device is normal.
• Checking any E-mails, and making sure that communication with the target device is nor-
• Checking any E-mails, and making sure that communication with the target device is nor-
mal (if the E-mail notification function is used).
When monitoring multiple target devices, you must check each target separately. For example, if monitor-
ing three devices, browse each of the three logs to make sure that communications with all are normal.
ETERNUSmgr treats any file that conforms to the "STX~.INI" format as a setup file, and loads it accord-
ingly. If ETERNUSmgr detects multiple setup files (for multiple devices), it will load all of them. See
ing three devices, browse each of the three logs to make sure that communications with all are normal.
ETERNUSmgr treats any file that conforms to the "STX~.INI" format as a setup file, and loads it accord-
ingly. If ETERNUSmgr detects multiple setup files (for multiple devices), it will load all of them. See
for information about setup files.
The setup files are read automatically when ETERNUSmgr is started, but processing stops when the fol-
lowing messages appear.
lowing messages appear.