Sanyo PLC-WXE45 사용자 가이드

The AC outlet must be near this equipment and must be easily

accessible.

Connect the AC power cord (supplied) to the

projector.

Note:
Unplug the AC power cord when the projector is not in

use. When the projector is connected to an outlet with the

AC power cord, it is in stand-by mode and consumes a

little electric power.

This projector uses nominal input voltages of 100–120 V

or 200–240 V AC and it automatically selects the correct

input voltage. It is designed to work with single-phase power

systems having a grounded neutral conductor. To reduce

the risk of electrical shock, do not plug into any other type of

power system.

If you are not sure of the type of power being supplied,

consult your authorized dealer or service station.

Connect the projector with all peripheral equipment before

turning it on.

To power cord

connector on your

projector.

Ground

To the AC outlet.
(10 V AC)

To the AC outlet.
(00–40 V AC)

To the AC outlet.
(00–40 V AC)

AC power cord must meet the requirements of the country where you use the projector.

Confirm the AC plug type with the chart below and proper AC power cord must be used.

If the supplied AC power cord does not match your AC outlet, contact your sales dealer.