Sanyo PLC-WXE45 사용자 가이드

Press the POWER ON/STAND-BY button on the

remote control, and “Power off?” appears on the

screen.

Press the POWER ON/STAND-BY button again to turn

off the projector. The POWER indicator starts to blink

red, and the cooling fans keep running. (You can select

the level of the fans’ quietness and running speed. See

page 49.) At this time you can unplug the AC power

cord even if the fans are still running.

TO MAINTAIN THE LAMP LIFE, ONCE YOU

TURN THE PROJECTOR ON, WAIT AT LEAST 5

MINUTES BEFORE TURNING IT OFF.

When the projector has cooled down enough to be

turned on again, the POWER indicator stops blinking.

“Power off” disappears after 4 seconds.

Power off?

Note:
• When the On start function is “On,” this projector is turned

on automatically by connecting the AC power cord to an
AC outlet (p. 46).

• The running speed of cooling fans is changed according

to the temperature inside the projector.

• Do not put the projector in a case before the projector is

cooled enough.

• If the WARNING indicator blinks or emits a red light, see

“Warning Indicator” on page 54.

• While the POWER indicator is blinking, the lamp is being

cooled down and the projector cannot be turned on. Wait
until the POWER indicator stops blinking to turn on the
projector again.

• The fan rotation will terminate directly if the AC power

cord is unplugged immediately after the projector is turned
off.

• The projector can be turned on after the POWER indicator

turns red. The waiting time to restart will be shortened
when the normal power-off processing for fan cooling is
completed, compared with the time the AC power cord is
immediately unplugged after the power-off.

Turnin� Off the Projector

DO NOT OPERATE THE PROJECTOR

CONTINUOUSLY WITHOUT REST. CONTINUOUS

USE MAY RESULT IN SHORTENING THE LAMP

LIFE. TURN OFF THE PROJECTOR AND LET

STAND FOR ABOUT AN HOUR IN EVERY 24

HOURS.

Basic Operation