Netgear GS510TP-100NAS 사용자 설명서

Step 2: Installing the Switch

The GS510TP Smart Switch can be used on a flat surface or mount in a rack.

Installing the Switch on a Flat Surface

The switch ships with four self-adhesive rubber footpads. Stick one rubber footpad on each of 
the four concave spaces on the bottom of the switch. The rubber footpads cushion the switch 
against shock/vibrations. 

Rack Mounting the Switch

To mount the switch in a rack, attach the included rack mounting brackets to the switch. Then 
connect the switch to the rack, securing the mounting brackets to the rack.

Power source

. 

Ensure the AC outlet is not controlled by a wall switch, which can accidentally turn off 
power to the outlet and the switch.

Environmental

• Temperature - Install the switch in a dry area, with ambient temperature between 0ºC 

and 50ºC (32ºC and 122ºF). Keep the switch away from heat sources such as direct 
sunlight, warm air exhausts, hot-air vents, and heaters.

•  Operating humidity - The installation location should have a maximum relative 

humidity of 90%, non-condensing.

• Ventilation - Do not restrict airflow by covering or obstructing air inlets on the sides of 

the switch. Keep at least 2 inches (5.08 centimeters) free on all sides for cooling. Be 
sure there is adequate airflow in the room or wiring closet where the switch is installed.

•  Operating conditions - Keep the switch at least 6 ft. (1.83m) away from nearest 

source of electromagnetic noise, such as a photocopy machine.