Uniden BCD396T 사용자 설명서

92

Notes: 

• If all frequencies in the search band you selected 

are locked out, All Locked! appears and the 

scanner does not search the band.

• If the service you select uses channels (such as 

CB radio or marine), the scanner displays the 
service channel number.

Quick Search lets you search from the currently-tuned 
frequency if you are scanning a conventional system 
or sets the system to ID search if you are scanning a 
trunked system.

If you are on a conventional system or channel, press 

 and Scan/Srch to start quick search. Quick 

Search Yes = E / No = “.”  appears. 
Qck Search Hold appears if you press Hold. 

Press E to start quick search or No to go to the search 
menu.

CTCSS/DCS Search lets you search for CTCSS or 
DCS tones when it finds an active frequency in search 
and Close Call modes. You can identify up to 50 
CTCSS tones and 104 DCS codes.

Turning this option on lets the scanner search for 
CTCSS/DCS tones. If the scanner detects the tone, it 
displays the tone’s frequency and DCS code.

1. Press 

 then turn the scroll control until 

Srch/CloCall Opt appears. Then press the 

scroll control. One of the search feature options 
appear.

2. Turn the scroll control until CTCSS/DCS Search   

appears, then press the scroll control

 to select it.

3. Turn the scroll control until On appears to turn on 

CTCSS/DCS search or until Off appears to turn it 

off, then press the scroll control.