Uniden BCD396T 사용자 설명서

94

Note: If all frequencies in all active custom search 
ranges are locked out, All Locked! appears and 

the scanner does not stop.

You can edit up to 10 custom search ranges. The 
names of the custom search ranges appear on the 
display. The default custom search range names 
appear as Custom 1, Custom 2, and so on.

1. Press 

 then turn the scroll control until 

Search for ... appears. Then press the scroll 

control. Or press 

 and Srch, then No. One of 

the search feature options appear.

2. Turn the scroll control until Edit Custom 

appears, then press the scroll control to select it.

3. Turn the scroll control until the name of the custom 

search range you want to edit appears, then press 

the scroll control to select it. The following options 

appear as you turn the scroll control.

Edit Name  - lets you edit the custom search range’s 

name

Edit Srch Limit  - lets you view and select the 

frequency ranges to search. The scanner prompts you 
to enter the upper and lower search limits.

Set Delay Time - lets you set the amount of time 

the scanner will delay before continuing to search after 
a transmission ends

Set Modulation  - lets you set the custom search 

range’s modulation type

Set Attenuator  - lets you set whether the scanner 

will attenuate reception by 18dB during search

Set Data Skip  - lets you set whether the scanner 

will skip data transmissions during search

Set Step  - lets you set the custom search range’s 

step (the gap between frequencies)