Uniden BCD396T 사용자 설명서

93

Custom Search lets you program and search 10 
custom search ranges. You can search any of these 
ranges simultaneously and select each custom search 
range you set. During custom search, the scanner 
searches starting with the lowest frequency in the 
search range you select to the highest frequency in 
the range.

Notes: 

• Search ranges are preset. See “Editing a Custom 

Search Range” on Page 94 to change the range.

• You cannot turn off all custom search ranges.

1. Press 

 then turn the scroll control until 

Search for ... appears. Then press the scroll 

control.  Or, press 

 + Scan/Srch, then select 

No. One of the search feature options appear.

2. Turn the scroll control until Custom Search 

appears, then press the scroll control to select it. 
The scanner starts custom search of the custom 
search range you selected, stopping on any trans-
mission it finds and displaying the frequency. 
Turn the scroll control to change the search 
direction. An arrow appears, showing the current 
search direction.

To turn search ranges on or off, press 0 and 1-9. 
To hold searching, press Hold. To resume searching, 
press  

then 

press 

Scan/Srch or Hold again. 

To lock out a frequency found while searching, press 
L/O. Search Lockout? appears. Press the scroll 

control to lock out the frequency or No to continue 
monitoring.

If you turn off the active custom search range, the 
scanner skips to the next custom search range and 
continues searching.