Uniden BCT15 사용자 설명서

35

You can mount your scanner in your vehicle, using either the supplied bracket or 
the optional DIN-E sleeve.

With the bracket removed from the radio, use the holes in the bracket as a 
template to initially mark the location you plan to use in your vehicle. Be absolutely 
certain of what might be behind the mounting surface before making any holes, be 
it above, or below, or in front of your dash, armrest console, or other location. If you 
drill carelessly, expensive damage can result. If in doubt, consult your vehicle 
dealer’s service department or a qualified professional installer.

Important: AVOID AIRBAG DEPLOYMENT ZONES. Ignoring this installation 
concern may result in bodily harm and the inability of the airbag to perform 
properly.

1.

Using appropriate screws or other hardware, secure the bracket.

2.

Insert the scanner and insert the bracket knobs to lock the scanner in position.

3.

Attach the Cigarette Lighter Power Cord to the rear of the scanner and plug 
the adapter end into a dash mounted 12V DC socket.

4.

Attach a suitable mounted mobile antenna to the antenna jack on the back of 
the scanner.