Uniden BCT15 사용자 설명서

36

If you are unsure about how to install your scanner in your vehicle using the 
optional DIN-E sleeve, consult your automobile manufacturer, dealer, or a qualified 
installer. Before installing, confirm that your scanner fits in the desired mounting 
area and you have all the necessary materials to complete the task. Your scanner 
requires a 2 x 7-1/8 x 5-5/16 inch (50 x 180 x 135 mm) mounting area.

Allow an additional 2-3/8 inch (60mm) space behind the unit for connectors and 
wires.

To purchase the DIN-E sleeve and included Removal Keys, visit 
http://www.uniden.com/store/ and order part number, DIN-0001.

1.

Remove the bracket if it is attached.

2.

Remove the four Philips screws from four small tabs on the rear of the case 
that secure the outer metal case and pull off the case (toward the rear) with 
care. 

3.

Install the DIN sleeve into the opening in your dashboard, lip facing out. 

4.

Push out the top and bottom tabs to hold the sleeve firmly in place.

5.

Before inserting the scanner in the sleeve, attach the cable from the previously 
mounted antenna. Attach the DC Power leads. RED goes to a positive (+)