Uniden BCT15 사용자 설명서

37

connection on your fuse block while BLACK connects to the vehicle’s chassis 
ground (-). 

6.

Connect the ORANGE lead to one side of the headlamp switch so that when 
you activate the headlights, the scanner’s LCD display changes intensity. Be 
sure all the connections are routed away from any potentially pinching or 
slicing sheet metal. 

7.

Slowly slide the scanner into the sleeve until it locks in place.

8.

To remove the unit, fully insert the removal keys into each slot on the left and 
right edges of the front panel. Carefully slide the radio from the sleeve.

Note: if you plan to connect a GPS unit or external speaker at a later time, expect 
to remove the unit for ease of making those connections.

If you plan to connect other devices or wires to the radio, such as a GPS unit, at a 
later time, you should plan to remove the scanner from the DIN-E sleeve. This is 
easily done using the provided Removal Keys that come with the optional DIN-E 
sleeve. See “To purchase the DIN-E sleeve and included Removal Keys, visit 
http://www.uniden.com/store/ and order part number, DIN-0001.” on page 36. 
Refer to the left illustration that follows, showing the Removal Keys.

Fully insert both Removal Keys into the slots on the left and the right edges of the 
radio’s dress panel. You cannot remove the radio with only one key. Press in fully,