Uniden BCT15 사용자 설명서

38

and do not twist the keys. The radio will unlock from the sleeve making withdrawal 
from the sleeve possible. Store the keys in a safe place for future use.

Some vehicles can take advantage of another approach to mounting a radio in a 
vehicle, called the ISO technique. However, this technique requires a very detailed 
and thorough knowledge of the technique. Therefore, we strongly suggest that if 
you have any doubt about your experience and abilities, please consult with a 
professional installer who is familiar with the ISO approach to radio installation.

To begin the process, it is first necessary to remove the scanner’s outer metal 
sleeve from the inner chassis. Unthread the four screws in the rear of the unit. 
Slide the cover toward the rear and off. Once the sleeve is removed, you will see 
threaded, metric machine screw holes on either side of the chassis cabinet. 
Uniden does not supply these screws. Their diameter, length, and screw type 
should be chosen by a qualified installer based on the internal vehicle bracket 
which will be used in securing the scanner chassis.

Once the original radio is removed from the vehicle dash and the fit of the scanner 
is correct, be sure to connect all the power, audio, antenna, and any other cables 
or wires, to the scanner before the scanner is secured.

The following illustration is a typical example of the ISO technique and the general 
side mounting screw holes often encountered. It does not actually represent the 
Uniden scanner nor your vehicle’s mounting bracket. Only a professional installer 
will be able to determine the best and correct approach.