Uniden UBC3500XLT 사용자 설명서

32

To begin scanning programmed systems, press Scan. 
The UBC3500XLT scans all unlocked systems in all 
activated quick-key groups and any searches 
unlocked for search and scan.

Notes: 

• If no systems are programmed, or all systems are 

locked out, an error message appears. Program a 
system or select a system to scan.

• When scanning multiple systems, the 

UBC3500XLT scans systems according to the 
assigned quick key. Systems assigned to quick 
key 1 are scanned first, then 2, 3, 4, etc. Systems 
not assigned to a quick key are scanned last, then 
unlocked searches. Within a quick key, systems 
are scanned in the order they were assigned.

• Within a system, channels are scanned according 

to the assigned channel group, with the same 
priority as described above for systems.

• The UBC3500XLT scans a system for the duration 

you set using the System Hold Time option (see 
“Setting the System Hold Time” on Page 47). 
Conventional systems operate similarly, but all 
unlocked channels are scanned at least one time 
regardless of the hold time setting.

• Each search range is searched for the amount of 

time you set using the “Set Hold Time” option. See 
“Setting the System Hold Time” on Page 47 for 
more information.

To select systems to scan, press Scan then press the 
quick key assigned to the system or systems you want 
to scan. For quick keys 0-9, press the quick key’s 
number. For quick keys 10-99, press   then press the 

UB347ZH.fm  Page 32  Thursday, August 31, 2006  11:57 AM