Uniden UBC3500XLT 사용자 설명서

33

quick key’s 2-digit number. To stop scanning the 
system(s), press   (if the quick key is a 2-digit quick 
key) then the number button or buttons again.
The Sx: (system) indicators on the display show the 
systems that are currently selected.
To select or lock out a system that is not assigned to a 
key, press and hold 

 while you rotate the scroll 

control until the desired system is selected. Then, 
continue to hold 

 and press L/O to either lock out 

or unlock the system.

Within a system, you can assign groups of channels to 
a group quick key (see “Setting the Group Quick Key” 
on Page 50). 

Follow these steps to activate or deactivate a channel 
group within a system while scanning.

1. Press 

 to hold on the system (or hold down  

 then rotate the scroll control to select the 

system). 

2. Continue to hold 

 and press the number key 

corresponding to the channel group you want to 
activate or deactivate.

Follow these steps to lock out a system so that it does 
not scan even if its quick key is selected.

1. While holding down 

, rotate the scroll control 

to select the system.

2. Continue to hold down 

 and press L/O to lock 

out the system. System Locked appears.

3. Repeat Steps 1 and 2 to unlock a system you 

have previously locked. System Unlocked 

appears.

UB347ZH.fm  Page 33  Thursday, August 31, 2006  11:57 AM