Uniden UBC3500XLT 사용자 설명서

34

Follow these steps to lock out a channel so that it does 
not scan even if its system and channel group are 
selected.

1. While holding down 

, rotate the scroll control 

to select the system where the channel is stored.

2. Release  

then 

press 

Hold within 2 seconds 

to hold on the system.

3. Rotate the scroll control to select the channel you 

want to lock or unlock.

4. Press L/O to lock or unlock the channel.

You can also lock out an active channel by pressing 
L/O while the scanner is stopped on the channel.

To temporarily hold on a system, press and hold 

. 

To hold on a different system, continue to hold 

 

and rotate the scroll control to select the system. 
Normal scanning resumes 2 seconds after you release 

.

To hold on a channel, press Hold while the channel is 
active. To select a different channel, rotate the scroll 
control. If you scroll past the beginning or end of the 
current system, the scanner selects channels in the 
previous or next system. To resume scanning, press 
Scan.

1. Hold on an existing channel in any system.

2. Enter the frequency you want to store.

3. To quick-store the channel, press E. Otherwise, 

press .

If you enter a frequency then press E, the scanner 
stores it in the Qck Save Grp group in a system 

UB347ZH.fm  Page 34  Thursday, August 31, 2006  11:57 AM