Festool PI567696 사용자 설명서

6

4.2

4.1

The RS 2 E has an electronic control with which 
the rotational speed can be varied step-free. This 
allows the sanding speed to be adapted to the op-
timum level according to the material concerned. 

The speed is set using the rotary control button 
(2.1). The numbers on the rotary control button 
represent approximately the following stroke/
orbit speeds:

Dust extractors prevent large accumulations of 
dust in the air in the working environment and 
dirt collecting in the workplace. 

The machines are fi tted with inbuilt extraction as 
standard. Push the fi lter holder (3.3) with its open-
ing as far as it will go onto the extraction nozzle 
(3.4) of the machine and clamp tight by turning 
rotary knob (3.1).

The sanding dust is extracted through suction 
openings in the sanding base and trapped in 
the turbo-fi lter (3.2). The turbo-fi lter has to be 
changed when it is so full of dust that the extrac-
tion power diminishes.

In order to avoid frequent changing of the turbo-
fi lter when carrying longer sanding jobs, it is 
possible to connect a Festool extractor to the unit 
instead of using inbuilt extraction. Connect the 
hose (Ø 27 mm (4.1) from a Festool dust extractor 
to the extraction outlet on the tool (4.2).

2.1

3.1

3.2

3.3

3.4