Festool PI567696 사용자 설명서

8

7.1

 Never overload the tool by using 

too much pressure! The best sanding results are 
achieved when applying moderate pressure. 

The sanding performance and quality depend 
mainly on the choice of the right sanding material. 
Festool offers the appropriate sanding material 
for all applications (see Festool catalogue). 

 The following precautions are to be 

taken when processing metals for safety reasons:

- connect a residual current operated device in 

series before the tool,

- connect tool to a suitable dust extractor,
- clean tool regularly of dust accumulations in the 

motor housing.

We recommend the following settings on the ro-
tary control (7.1) for electronic machines:

5 - 6
- sanding with max. drive
- sanding old paint
- sanding wood and veneer prior to painting
- interim sanding of paint on surfaces
- removing rust from surfaces using sanding cloth 
- partial sanding of V2A steel/sheet metal using 

sanding cloth 

4 - 5
- sanding of thinly applied primer
- sanding of wood with sanding vlies
- sanding edges on wooden parts
- smoothing primed wooden surfaces.

3 - 4
- sanding full wooden and veneer edges
- sanding in the grooves/rebates of windows and 

doors

- interim paint sanding on edges
- pre-sanding natural wood windows with sand-

ing vlies

- smoothing wood surfaces with sanding felt prior 

to staining