Patton electronic 4110 사용자 설명서

Installing the gateway router

SmartNode 4520 & 4110 Series User Manual 

The SmartNode router is intended to be placed on a desktop or similar sturdy, flat surface that offers easy 
access to the cables. Allow sufficient space at the rear of the chassis for cable connections. Additionally, you 
should consider the need to access the unit for future upgrades and maintenance.

SmartNode gateway router installation consists of the following:

•

Placing the device at the desired installation location (see section 

•

Installing the interface and power cables (see section 

When you finish installing the SmartNode, go to chapter 4,

Place the router on a desktop or similar sturdy, flat surface that offers easy access to the cables. The router 
should be installed in a dry environment with sufficient space to allow air circulation for cooling. 

For proper ventilation, leave at least 2 inches (5 cm) to the left, right, front, 
and rear of the SmartNode gateway router.

Installing router cables takes place in the following order:

1. Installing the RJ-11 voice port (FXS) cable or cables (see “Installing an interface cable on the router’s FXS 

2. Installing the 10/100 Ethernet port cable or cables (see 

3. Installing the power input (see 

The Interconnecting cables shall be acceptable for external use 
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and 
mechanical serviceability.

WARNING

CAUTION