Patton electronic 4110 사용자 설명서

Bootloader

SmartNode 4520 & 4110 Series User Manual 

  

172.16.1.99(if-ip)[eth0]#

After the SmartNode has been rebooted the new start up configuration will be activated.

  

172.16.1.99(if-ip)[eth0]#reload

  

Running configuration has been changed.

  

Do you want to copy the 'running-config' to the 'startup-config'?

  

Press 'yes' to store, 'no' to drop changes : no

  

Press 'yes' to restart, 'no' to cancel : yes

  

The system is going down

The bootloader ensures that basic operations, network access, and downloads are possible in case of interrupted 
or corrupted application image downloads. It also offers console access to the Bootloader and the capability for 
downloading application images (e.g. SmartWare) via the serial link of the console.

To start the Bootloader, power on the SmartNode while pressing the reset button.  Open a Telnet session to 
the SmartNode via one of the Ethernet interfaces, or open a CLI session via the console port (if available on the 
SmartNode).  The login display will appear.  Using the credentials admin / patton, log in to the SmartNode. 
The following prompt will be displayed:

RedBoot>

Type help to display an overview of the available commands.