Maytag MGD6000X 설치 설명서

Using a Phillips screwdriver, remove the 6 screws from the 

outer window retainer and rotate the outer window assembly 

clockwise until the square notches line up with the 4 tabs  

on the trim ring indicated with arrows in the figure A above. 

Then lift the outer window retainer up and off the trim ring  

and set aside (B).

Rotate the outer window 180°. 

Align the notches on the outer door assembly with the tabs on 

the trim ring and lower into place as shown in figure A.  

Rotate the outer door assembly counterclockwise to lock tabs 

into place (figure B). Using a Phillips screwdriver, secure with 

6 screws removed earlier. 

IMPORTANT: Do not overtighten.