Maytag MGD6000X 설치 설명서

Using a Torx

®

 T25 screwdriver, remove the 3 Torx screws 

securing the latch plate and latch backing plate and the 5 

screws holding the hinge assembly in place.

Using a Torx

®

 T25 screwdriver, reinstall the latch plate, latch 

backing plate, and hinge assembly on the opposite sides from 

which they were removed.

Position the door with the inside of the door facing up. 

Reinstall the 10 screws securing the inner door to the outer 

door. 

Using a Torx

®

 T25 screwdriver, remove the 4 screws on the 

dryer. Insert the tabs on the hinge into the mounting slot and 

slide down to engage the top tab. Secure in place with  

the 4 Torx

®

 T25 screws removed earlier.

Hinge

Latch