Fantom Drives mgd-16fc16a 사용자 가이드
FIBRE-to-SAS/SATA RAID SUBSYSTEM
146
User Manual
10.2.2 Warnings
NOTE: The Alert Messages displayed here are example Alert
Messages.
Messages.
Notification Message
Action to be taken
Disk in bay <number> has
excessive errors
excessive errors
Backup data, schedule a disk replacement.
Disk in bay <number> is running
out of reallocation blocks
out of reallocation blocks
Backup data, schedule a disk replacement.
Disk in bay <number> has run out
of reallocation blocks
of reallocation blocks
Backup data, schedule a disk replacement.
Disk in bay <number> has failed
Backup data, schedule a disk replacement.
Disk in bay <number> is missing
Check to see if a rebuild is in progress for the
effected RAID.
effected RAID.
Reseat the missing disk.
Backup data, schedule a disk replacement.
Power Supply Module in slot
<number> is not working properly
<number> is not working properly
Reseat the power cord on both ends.
Verify that power is being supplied from the
power socket.
power socket.
Schedule a PSU module replacement.
Fan in slot <number> is not
working properly
working properly
Schedule a fan module replacement.
NVRAM battery is exhausted and
needs replacement
needs replacement
Schedule NVRAM Battery replacement.
NVRAM checksum invalid,
restoring default settings
restoring default settings
No action required, occurs immediately after the
battery has been replaced.
battery has been replaced.
The serial number on this system
is incorrect
is incorrect
Occurs immediately after the battery has been
replaced, controller serial number needs to be
entered by service engineer.
replaced, controller serial number needs to be
entered by service engineer.
Call Tech Support for help.
The temperature in the system has Ensure that all the disk bays have either disks or