Netgear FS726TP 사용자 가이드
Smart Switch Series Software Manual
4-8
Web-Based Management Interface
Click to select IEEE802.1Q VLAN. A screen pops up to confirm this change.
All ports are set belonging to VLAN 1 by default, all untagged.
From the page, you can create a new VLAN, add new ports to an existing VLAN, remove ports
from an existing VLAN or, delete a VLAN.
from an existing VLAN or, delete a VLAN.
Add a port to a VLAN Group
•
Under the VLAN ID drop down menu, select the VLAN you want to edit.
•
Click the box below the port number so that a ‘T’ (tagged) or ‘U’ (untagged) appears.
•
Click Apply.
Remove a port from a VLAN Group
•
Click the box again until a blank box appears. This will remove VLAN membership from the
port.
port.
•
Click Apply.
Note:
The default PVID of all ports is 1; therefore, you cannot remove any ports for the default
Tag VLAN. It means that before removing any desired port from default Tag VLAN, changes
PVID of such desired port to the PVID other than 1.
PVID of such desired port to the PVID other than 1.
Create a new VLAN Group
•
Under the VLAN ID drop down menu, select Add new VLAN.
•
Enter the VLAN ID “2” in the provided fields. VLAN ID must be set within 2 ~ 4094.
•
Add VLAN members if so desired; click the box below the port number so that a ‘T’ (tagged)
or ‘U’ (untagged) appears.
or ‘U’ (untagged) appears.
•
Click Apply.
Note:
To allow untagged packets to participate in VLAN 2, make sure to change the Port VLAN
Ids (PVID) for the relevant ports. Access the PVID Settings by using the VLAN ID drop down
menu.
menu.
Delete a VLAN Group
•
Under the VLAN ID drop down menu, select the VLAN you want to remove.
•
Click to select Remove VLAN.