Netgear gsm7312 사용자 설명서
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
7-46
Switching Commands
202-10009-01
•
Show commands display spanning tree settings, statistics, and other information.
•
Config commands configure features and options of the switch. For every config command
there is a show command that displays the config setting.
there is a show command that displays the config setting.
This section is organized by configuration type:
•
System information and statistics commands
•
Bridge and CIST commands
•
MSTI commands
•
Modified commands
•
Obsolete commands
show spanningtree summary
This command displays spanning tree settings and parameters for the switch.
Format
show spanningtree summary
Spanning Tree Adminmode Enabled or disabled.
Spanning Tree Version
Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or IEEE
802.1d) based upon the Force Protocol Version parameter.
802.1d) based upon the Force Protocol Version parameter.
Configuration Name
TConfigured name.
Configuration Revision
Level
Configured value.
Configuration Digest Key
Calculated value.
Configuration Format
Selector
Configured value.
MST Instances
List of all multiple spanning tree instances configured on the switch.
config spanningtree adminmode
This command sets the spanningtree operational mode. While disabled, the spanningtree
configuration is retained and can be changed, but it is not activated.
configuration is retained and can be changed, but it is not activated.
Default
disable
Format
config spaningtree adminmode <enable/disable>