Netgear gsm7312 사용자 설명서
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands
7-23
202-10009-01
Default
5
Format
config telnet timeout <0-160>
show forwardingdb agetime
This command displays the timeout for address aging. In an IVL system, the [fdbid|all] parameter
is required. In an SVL system, the [fdbid|all] parameter is not used and will be ignored if entered.
is required. In an SVL system, the [fdbid|all] parameter is not used and will be ignored if entered.
Default
all
Format
show forwardingdb agetime [fdbid|all]
Forwarding DB ID
Fdbid (Forwarding database ID) indicates the forwarding database whose aging
timeout is to be shown. The all option is used to display the aging timeouts
associated with all forwarding databases. This field displays the forwarding
database ID in an IVL system. This field will not be displayed in an SVL
system.
timeout is to be shown. The all option is used to display the aging timeouts
associated with all forwarding databases. This field displays the forwarding
database ID in an IVL system. This field will not be displayed in an SVL
system.
Agetime
displays the address aging timeout for the associated forwarding database in
IVL. In an SVL system, this will display the system's address aging timeout
value in seconds.
IVL. In an SVL system, this will display the system's address aging timeout
value in seconds.
config forwardingdb agetime
This command configures the forwarding database address aging timeout. In an IVL system, the
[fdbid/all] parameter is required. In an SVL system, the [fdbid/all] parameter is not used and will
be ignored if entered.
[fdbid/all] parameter is required. In an SVL system, the [fdbid/all] parameter is not used and will
be ignored if entered.
Default
The default value for <10-1,000,000> is 300 seconds
Format
config forwardingdb agetime <10-1,000,000> [fdbid/
all]
Seconds
The <seconds> parameter must be within the range of 10 to 1,000,000 seconds.
Forwarding Database ID
Fdbid (Forwarding database ID) indicates which forwarding database's aging
timeout is being configured. All is used to configure all forwarding database's
agetime. In an SVL system, the [fdbid/all] parameter is not used and will be
ignored if entered.
timeout is being configured. All is used to configure all forwarding database's
agetime. In an SVL system, the [fdbid/all] parameter is not used and will be
ignored if entered.
Device Configuration Commands
This section describes device configuration commands.