Netgear gsm7312 사용자 설명서

7-24

Switching Commands

This command displays switch configuration information.

 

 

May be enabled or disabled by selecting the corresponding line on the pull-
down entry field. The factory default is disabled. 

May be enabled or disabled by selecting the corresponding line on the pull-
down entry field. The factory default is disabled.

This command enables or disables broadcast storm recovery mode. If the mode is enabled, 
broadcast storm recovery with high and low thresholds is implemented.

The threshold implementation follows a percentage pattern. If the broadcast traffic on any Ethernet 
port exceeds the high threshold percentage (as represented in “Broadcast Storm Recovery 
Thresholds” table) of the link speed, the switch discards the broadcasts traffic until the broadcast 
traffic returns to the low threshold percentage or less. The full implementation is depicted in the 
“Broadcast Storm Recovery Thresholds” table.

<enable/disable>

This command enables or disables 802.3x flow control for the switch. 

This command only applies to full-duplex mode ports.

enable

<enable/disable>

This command displays port information.

10M

20

10

100M

5

2

1000M

5

2