Netgear FVS338 참조 매뉴얼
Reference Manual for the ProSafe VPN Firewall 50 FVS338
2-6
Introduction
January 2005
•
Warranty and Support Information Card.
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the firewall for repair.
carton, including the original packing materials, in case you need to return the firewall for repair.
The
Router’s Front Panel
The FVS338 ProSafe VPN Firewall 50 front panel shown below contains the status LEDs.
Figure 2-1: FVS338 Front Panel
You can use the LEDs to verify various conditions.
lists and describes each object on the
front panel of the router and its operation.
Table 2-1.
Object Descriptions
Object
Activity
Description
Power LED
On (Green)
Off
Off
Power is supplied to the router.
Power is not supplied to the router.
Power is not supplied to the router.
Test LED
On (Amber)
Blinking (Amber)
Off
Blinking (Amber)
Off
Test mode: The system is initializing or the initialization has failed.
Writing to Flash memory (during upgrading or resetting to defaults).
The system has booted successfully.
Writing to Flash memory (during upgrading or resetting to defaults).
The system has booted successfully.
MDM LED
On (Green)
Blinking (Green)
Off
Blinking (Green)
Off
The serial port detected a link with an attached modem.
Server data is being transmitted or received by the serial port.
The serial port has no link.
Server data is being transmitted or received by the serial port.
The serial port has no link.
MODEL
FVS
338
PWR
TEST
100
LINK/ACT
MDM
1
2
3
4
5
6
7
8
INTERNET
LOCAL
ProSafe VPN Firewall
100
LINK/ACT
Power
LED
Test
LED
LED
Modem
LED
Internet
LEDs
Local
LEDs