Quantum fc1202 사용자 가이드
Chapter 2 FC1202 Bridge Serial/Telnet User Interface
Perform Configuration
Perform Configuration
54
Quantum FC1202 User’s Guide
as Telnet or Visual Manager, because the method of setting up a lease
reservation varies depending on the DHCP server being used.
Contact your Network Administrator for assistance.
•
Change SNMP Settings
is not supported.
•
9) Change Security Settings
changes security settings, including the
user name and password.
The default user name is root and the default password is password.
The default user name is root and the default password is password.
Caution:
To ensure security, change the user name and password
from the default settings.
Fibre Channel
Configuration
Configuration
2
In the
Configuration Menu
, choose
Fibre Channel Configuration
to
configure the Fibre Channel port. The
Fibre Channel Configuration
Menu
allows the configuration of ALPA settings, discovery mode, tape backup
settings, port mode, default map, and override settings.
is an illustration of the
Fibre Channel Configuration Menu
.
Note:
To use the DHCP feature, a DHCP server must be operational
on the Ethernet network. If the DHCP feature is used when
there is no DHCP server, DHCP standards require that the
FC1202 wait three minutes for a response from a DHCP server
before timing out.
Note:
The security settings entered here affect all user interfaces.
Note:
User names and passwords should be unique and kept
confidential. Using a combination of letters and numbers
when creating user names and passwords is recommended.