Quantum fc1202 사용자 가이드

Chapter 2  FC1202 Bridge Serial/Telnet User Interface

Perform Configuration

Quantum FC1202 User’s Guide

55

Figure 36  Fibre 
Channel Configuration 
Menu

 options:

If these configuration settings are incorrectly set, 

processing difficulties may occur. Before changing these 

settings, evaluate the need for the change and verify the 

desired setting. Backing up the FC1202 configuration to an 

external file before making changes to these settings is 

recommended.

•

 (service mode-restricted access) 

changes the World Wide Port Name High.

•

 (service mode-restricted access)  

changes the World Wide Port Name Low.

•

 (default: N_Port) changes the port mode to either 

Auto Sense or N_Port:
•

: In this mode, the Fibre Channel port tries 

to negotiate as a loop. If it is not successful, then the Fibre 

Channel port negotiates as a fabric. If the port comes up as a loop, 

it then determines whether it is on a private or public loop.

•

 (default): This mode allows the FC1202 to bypass the loop 

negotiation and come up as a fabric only. Use this setting if a HP 

switch is being used. If the FC1202 is on a loop and N_Port mode 

is selected, an error in communication may occur.