Zhone 5100 참조 매뉴얼
CHAPTER 3
Interfaces
Interfaces
80
Vpacket 5100/6100 Series Reference Manual
SDSL WAN commands
You can configure the 5100/6100 VDR to interoperate with a Copper Mountain or Lucent
DSLAM. Three commands are used to configure the SDSL WAN interface:
•
•
set wan dslam
•
set wan encap
•
set wan data protocol
Other parameters that might need to be set depending on the DSLAM type include:
•
•
baud rate
•
band rate mode
•
data format
Note. For all commands, a Copper Mountain example is given first and then a Lucent
Stinger example is given.
Figure 3-2 shows the SDSL WAN interface default settings.
Figure 3-2. SDSL WAN interface default settings
VPacket# show wan
-------------- SDSL Port Settings --------------
DSLAM type : CopperMountain
Data Protocol : funi
Encapsulation type : 1483Bridged
Baud rate mode : AutoBaud
Base Baud rate : 160
Current Baud rate : 784
Data format : Serial
-------------------------------------------