ZyXEL 793H 사용자 가이드
Chapter 4 Point-to-(2)point Configuration
P-793H User’s Guide
67
4.4.2 Set up the Clients
1 Log in to one of the ZyXEL Devices that will be the client. (See
2 Click Network > WAN > Internet Connection.
3 Set the VPI, VCI, Multiplexing, and Encapsulation to the same values you set in the
3 Set the VPI, VCI, Multiplexing, and Encapsulation to the same values you set in the
server.
4 Scroll down to the Service Type section. A screen similar to the following appears.
5 In the Service Mode field, select 2 wire mode.
6 In the Service Type field, select Client. The rest of the fields will be negotiated with the
6 In the Service Type field, select Client. The rest of the fields will be negotiated with the
server.
7 Click Apply.
8 Repeat steps
8 Repeat steps
for the second client device.
4.4.3 Connect the ZyXEL Devices
Connect the DSL ports on the ZyXEL Devices together, and wait while the ZyXEL Devices
automatically establish the connection. Make sure that the Y-cable is connected to the proper
DSL outlets. The Y-cable connector marked DSL1 must be connected to the outgoing DSL 1
telephone jack and the Y-cable connector marked DSL2 must be connected to the outgoing
DSL 2 telephone jack.
When the connection is established, the DSL1, DSL2, and INTERNET lights turn on. It takes
up to half a minute to establish the connection. If the ZyXEL Devices do not establish the
connection, verify that the settings are correct.
automatically establish the connection. Make sure that the Y-cable is connected to the proper
DSL outlets. The Y-cable connector marked DSL1 must be connected to the outgoing DSL 1
telephone jack and the Y-cable connector marked DSL2 must be connected to the outgoing
DSL 2 telephone jack.
When the connection is established, the DSL1, DSL2, and INTERNET lights turn on. It takes
up to half a minute to establish the connection. If the ZyXEL Devices do not establish the
connection, verify that the settings are correct.