MicroBoards pf3-1000 사용자 가이드

• Assembly and Installation 

 

The Ink tab provides you with the approximate remaining Ink Levels as a percentage of the full 
cartridge capacity.  These are approximations only, and are based on the assumption that the 
cartridges were full when installed in the printer.  

The Color Ink percentage is based on the lowest remaining of the 3 colors.  
To view the approximate levels of each individual color, click the Advanced 
Ink Levels button.  The individual color levels are only updated at the 
beginning or end of a print job; if you are printing a large number of discs, the 
overall Color Ink level on the main tab is a better indication of the true ink 
level remaining.  

Also on the Ink tab are the Ink Cartridge Replacement model numbers. 

The Alignment tab allows you to change the printer alignment. 

The Resolution setting will specify whether the alignment 
values are measured in 1mm or 0.1mm increments.  The 
0.1mm setting is more precise and should always be used. 

The Alignment values will move the print image on the disc.   

Increasing the Top alignment value will move the print image down on the disc, while decreasing it 
will move the image up on the disc.  Increasing the Left alignment value will move the print image to 
the right on the disc, while decreasing it will move the image left.   

 

 

 

 

 

Use the accompanying graphic on the Alignment 
tab as a guide for what needs to be done if the 
image is not centered.   

 

 

 

 

 

The About tab provides you with contact information for the worldwide Microboards offices.