MicroBoards pf3-1000 사용자 가이드

 

To access the Microboards Toolbox, double-click the 
toolbox icon located in the tool tray.   

Select the Microboards PF3 and click the buttons to 
access a particular maintenance function of the 
Toolbox for the selected printer. 

The Toolbox should be left running at all times in order 
to provide you with low ink warnings.  Warnings will still 
be provided with the toolbox minimized. 

 

 

The printheads may require cleaning if the printed images show streaks of color.  This may occur if 
the Print Factory has been idle for an extended period of time.   

There are 3 levels of cleaning available: Wipe and Spit, Clean, and Super Clean.   

Wipe and Spit is a low-level cleaning, using the least ink and taking the least amount of time to 
complete.  Clean uses more ink and takes more time.  Super Clean uses the most ink and takes the 
longest time to complete.   

After each of the cleanings, a disc will be printed to verify the cleaning results.   

Running this process more than once may be required if the quality does not improve after cleaning 
one time. 

 

The print pens may occasionally need calibration.  
You will need to have blank discs loaded in the 
input hopper for this process. 

Press the Pen Calibration button.  A disc will 
print with 4 sets of numbered lines – Black to 
Color Horizontal, Black to Color Vertical, Black 
bidi Alignment, and Color bidi Alignment. 

 

Position the 4 slide bars in the window shown to 
the right based on the line number that has the 
best alignment in each of the 4 printed sets.  

Click  OK when complete.  The patterns will be 
printed again using the entered pen alignment 
values. 

This procedure should not be a regular necessity.