Canon JX200 사용자 가이드

Before Using Your Machine

Enter the party's name (up to 16 letters) using the numeric buttons, then press 
[Start/Copy] to register the name. (see page 9).

To assign additional one-touch speed dialing numbers, repeat from step 4.
To finish, press [Stop].

Use coded speed dialing to dial a fax number at the press of three buttons. A fax/telephone number 
can be registered under each two-digit speed dialing code and you can register up to 60 locations. 
You can also register the name of the party the name appears on the printout of the coded speed 
dialing list.

Press [Menu].

Use [{] or [}] to select <TEL REGISTRATION>, then press [Start/Copy]. The LCD 
displays <1-TOUCH SPD DIAL>.

Use [{] or [}] to select <CODED SPEED DIAL>, then press [Start/Copy]. The 
LCD displays < 00>.

Use [{] or [}] to select the two-digit code (00-59) under which you want to register 
the number, then press [Start/Copy] twice.

If a number is already registered under this coded speed dialing code, the number is 
displayed on the LCD.

Enter the party’s number and name the same way you registered them for one-
touch speed dialing. 

See steps 5 to 6, “Registering One-touch Speed Dialing Numbers and Names” on page 13.

To assign additional coded speed dialing numbers, repeat from step 4. 
To finish, press [Stop].

To delete the name and number registered under the one-touch speed dialing button, press [Clear] and 

[Start/Copy] after you perform steps 1 to 4.

To delete the name and number registered under the coded speed dialing code, press [Clear] and [Start/

Copy] after you perform steps 1 to 4.

CANON

:A

TEL=250xxx_