Canon JX200 사용자 가이드
15
Before Using Your Machine
Document Requirements
Types of Document You Can Scan
Problem Documents
z
To prevent document jams in the Document Tray, do not attempt to load the following types of
documents into the fax:
documents into the fax:
z
Remove all staples, paper clips, etc. before loading the document into the Document Tray.
z
Make sure any glue, ink, or correction fluid on the paper is completely dry before loading the
document into the Document Tray.
document into the Document Tray.
z
Make a photocopy of any document that will not feed into the fax so that you can then load the
copy into the Document Tray.
copy into the Document Tray.
z
Scanned Area
The actual area scanned by the fax is
shown below.
shown below.
z
Size
You can load documents larger than 4.2 in.
(105 mm) wide and 4.2 in. (105 mm) long.
The maximum size of document that can be
loaded is 8.5 in. (216 mm) wide by 16.0 in.
(400 mm) long.
(105 mm) wide and 4.2 in. (105 mm) long.
The maximum size of document that can be
loaded is 8.5 in. (216 mm) wide by 16.0 in.
(400 mm) long.
Note
If you use documents smaller than letter size, align the document with the left Document Guide.
- Wrinkled or creased paper
- Torn paper
- Coated paper or glossy paper
- Thick paper
- Torn paper
- Coated paper or glossy paper
- Thick paper
- Curled or rolled paper
- Carbon paper or carbon-backed paper
- Onion skin or thin paper
- Envelopes
- Carbon paper or carbon-backed paper
- Onion skin or thin paper
- Envelopes
LTR/LGL
0.12 ±0.12 in.
(3.0 ±3.0 mm)
(3.0 ±3.0 mm)
0.08 ±0.08 in.
(2.0 ±2.0 mm)
(2.0 ±2.0 mm)
0.08 ±0.14 in.
(2.0 ±3.5 mm)
(2.0 ±3.5 mm)
0.08 ±0.14 in.
(2.0 ±3.5 mm)
(2.0 ±3.5 mm)
Min. 4.2 in.
(105 mm)
(105 mm)
Min. 4.2 in.
(105 mm)
(105 mm)
Max. 16.0 in
(400 mm)
(400 mm)
Max. 8.5 in. (216 mm)