Maytag mmv4205b 설치 설명서

Attach the plate to the wall using toggle bolts. At least 
one wood screw must be used to attach the plate to 
a wall stud.

Remove the toggle wings from the bolts.

Insert the bolts into the mounting plate through 
the holes designated to go into drywall and 
reattach the toggle wings to ¾ " onto each bolt.

Place the mounting plate against the wall and 
insert the toggle wings into the holes in the wall to 
mount the plate.

NOTE: Before tightening toggle bolts and wood 
screw, make sure to coincide bottom line of the 
Mounting plate with Horizontal line of “Rear wall 
Template” and then the Mounting plate is properly 
centered under the cabinet.

CAUTION: Be careful to avoid pinching fingers 
between the back of the mounting plate and the wall.

Tighten all bolts. Pull the plate away from the wall 
to help tighten the bolts.

You need to drill holes for the top support screws and 
a hole large enough for the power cord to fit through.

•

Read the instructions on the TOP CABINET 
TEMPLATE.

•

Tape it underneath the top cabinet.

•

Drill the holes, following the instructions on the 
TOP CABINET TEMPLATE.

CAUTION: Wear safety goggles when drilling holes 
in the cabinet bottom.

A1. Attach Mounting Plate to Wall

A2. Prepare Top Cabinet

A3. Mount the Microwave Oven

Wall

Toggle Wings

Toggle 
Bolt

Bolt End

Spacing for Toggles More 
Than Wall Thickness

Mounting 
Plate