Maytag mmv4205b 설치 설명서

FOR EASIER INSTALLATION AND PERSONAL 
SAFETY, WE RECOMMEND THAT TWO PEOPLE 
INSTALL THIS MICROWAVE OVEN.

NOTE: If your cabinet is metal, use the nylon 
grommet around the power cord hole to prevent 
cutting of the cord.

NOTE: We recommend using filler blocks if the 
cabinet front hangs below the cabinet bottom shelf.

NOTE: When mounting the microwave oven, thread 
power cord through hole in bottom of top cabinet. 
Keep it tight throughout Steps 1–3. Do not pinch cord 
or lift oven by pulling cord.

Insert a self-aligning screw through top center 
cabinet hole. Temporarily secure the oven by 
turning the screw at least two full turns after the 
threads have engaged. (It will be completely 
tightened later.) Be sure to keep power cord 
tight. Be careful not to pinch the cord, 

Attach the microwave oven to the top cabinet.

Tighten the outer two screws to the top of the 
microwave oven. (While tightening screws, hold 
the microwave oven in place against the wall and 
the top cabinet.)

Install grease filters. See the Owner’s Manual 
packed with the microwave.

Rotate front of oven 
up against cabinet 

bottom

Lift microwave, tilt it 
forward, and hook slots

at back bottom edge 

onto four lower tabs of 

mounting plate.

Cabinet Front

Self-Aligning Screw

Equivalent to 
Depth of 
Cabinet Recess

Microwave Oven Top

Filler Block

Cabinet Bottom Shelf

Tighten center 
screw completely.

Insert 2 self-aligning screws through outer 
top cabinet holes. Turn two full turns on 
each screw.