Canon lbp5970 사용자 가이드
45
Step
7
1
Make sure that the Job indicator is off.
2
Press "
" of the power switch on the printer.
When Using a Hard Disk (Only When a Hard Disk Is
Installed)
When using the optional hard disk, turn the printer OFF using the following
procedure.
procedure.
IMPORTANT
•
If you perform a shutdown when any job of which you stopped the
operation or of secured print in the hard disk, the message <JOBS
REMAIN> is displayed. If you perform a shutdown, all the jobs are deleted.
However, the jobs stored in the boxes are saved in the hard disk as it is.
When you want to continue to print, press [Online] to place the printer
online.
•
Once you perform a shutdown, you cannot cancel the operation in
midstream. When you want to turn the printer ON again, turn the printer
OFF once following the instruction of the message, and then turn the
printer ON.
NOTE
You can also perform SHUT DOWN in the RESET menu by pressing
[Reset] on the control panel. For more details, see "Chapter 5 Printing
Environment Settings" in User's Guide.
1
Make sure that the Job indicator and HDD
indicator are off.
2
Hold down the control panel power switch (sub
power supply) on the control panel until <02
SHUTTING DOWN> is displayed, then release the
switch.
Hold down the switch (approximately 4 seconds) until <02
SHUTTING DOWN> is displayed. If the switch is released in less
than 4 seconds, and POWER SAVE MODE is set to a setting value
other than OFF, the printer enters Power Save Mode. (See User's
Guide)
3
Confirm the message.
When the printer is ready to be turned OFF after the process for it is
performed, the message <TURN OFF POWER> appears.
Online
Feeder Selection
Ready
Job
Job
Power
Reset
Utility
Settings
Message
Cancel Job
HDD
Main Power
OK
Off
Online
Feeder Selection
Ready
Job
Job
Power
Reset
Utility
Settings
Message
Cancel Job
HDD
Main Power
OK
Off
Power
02 SHUTTING DOWN
TURN OFF POWER