Lowrance 5200c 작동 가이드

 

141 

9. Fill up your tank again, noting how much fuel you added to the tank. 

Compare that number to the Fuel Used figure displayed on the page 

you customized. If the amount of fuel you added to the tank and the 

fuel used figure are off by more than 3 percent, we recommend the en-

gine interface be calibrated. 
NOTE: 

You must use the gauge's Fill Tank command when filling your fuel 

tank to keep the engine interface updated with correct information 

on the amount of fuel in the tank. 

10. If calibration is necessary, press 

|

, select

 and 

press 

. 

11. Highlight 

 and press 

.  

12. Select 

 and press 

 to choose the location of the tank 

connected to the selected engine interface. Press 

. 

13. Highlight 

 and press 

. The following message will ap-

pear: Are you sure you wish to Fill Tank? Select 

 and press 

14. The following message will appear: Do you wish to re-calibrate the 
device? Select 

 and press 

. 

15. Repeat these steps for each engine interface you want to calibrate. 
Engine Trim Calibration 
Engine Trim is calibrated through the Suzuki Engine Interface Device 

Configuration menu. 
1. Press 

|

, select 

 and press 

. 

2. Choose 

and press 

. Select the Suzuki Engine Inter-

face connected to the desired engine and press 

. 

3. Highlight 

 and press 

. The Device Calibration win-

dow will appear with a list of Calibration Instructions. 
4. Highlight 

 and press 

. The following message 

will appear: Please fully raise the Engine Trim. 
5. After engine trim has been fully raised, press 

. The following 

message will appear: Please fully lower the Engine trim.  
6. After engine trim has been fully lowered, press 

. A Calibration 

Completed message will appear. Press 

.  

7. Repeat these instructions to adjust the engine trim for each engine 

connected to a Suzuki Engine Interface. Press 

 repeatedly to return 

to the main display.