3com MSR 20-20 참조 매뉴얼
1619
Example
# Tunnel 0 provides protection for LSPs using BC0 bandwidth without protecting
bandwidth. Tunnel 1 provides protection for LSPs using BC1 bandwidth and it can
protect 1000 kbps bandwidth.
bandwidth. Tunnel 1 provides protection for LSPs using BC1 bandwidth and it can
protect 1000 kbps bandwidth.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te backup bandwidth bc0 un-limited
[Sysname-Tunnel0] quit
[Sysname] interface tunnel 1
[Sysname-Tunnel1] mpls te backup bandwidth bc1 1000
mpls te bandwidth
Syntax
mpls te bandwidth [ bc0 | bc1 ] bandwidth
undo mpls te bandwidth
View
Tunnel interface view
Parameter
bc0: Obtains bandwidth from BC0.
bc1: Obtains bandwidth from BC1.
bandwidth: Bandwidth needed by the MPLS TE tunnel, in the range 1 to
32000000 kbps.
32000000 kbps.
Description
Use the mpls te bandwidth command to assign bandwidth to the MPLS TE
tunnel.
tunnel.
Use the undo mpls te bandwidth command to restore the default.
By default, no bandwidth is assigned to MPLS TE tunnels.
If neither the bc1 keyword nor the bc0 keyword is specified, bandwidth is
assigned using the global bandwidth pool (BC0).
assigned using the global bandwidth pool (BC0).
Example
# Assign 1000 kbps bandwidth to MPLS TE tunnel 0.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te bandwidth 1000
mpls te bandwidth change thresholds
Syntax
mpls te bandwidth change thresholds { down | up } percent
undo mpls te bandwidth change thresholds { down | up }
View
Interface view