3com MSR 20-20 참조 매뉴얼

MPLS view

None

Use the mpls te cspf command to enable CSPF on current node.

Use the undo mpls te cspf command to disable CSPF on current node.

By default, CSPF is disabled on current node.

Before enabling CSPF, enable MPLS TE in MPLS view.

CSPF provides an approach to path selection in MPLS domains. You must enable 
CSPF before configuring other CSPF related functions.

# Enable CSPF.

<Sysname> system-view

[Sysname] mpls

[Sysname-mpls] mpls te cspf 

mpls te cspf timer failed-link timer-interval

MPLS view

timer-interval: Failed link timer setting, in the range 0 to 300 seconds. The default 
is 10 seconds.

Use the mpls te cspf timer failed-link command to configure the failed link 
timer.

Use the undo mpls te cspf timer failed-link command to restore the default.

# Set the failed link timer to 50 seconds.

<Sysname> system-view

[Sysname] mpls

[Sysname-mpls] mpls te cspf timer failed-link 50