3com MSR 20-20 참조 매뉴얼

Interface view

bandwidth-value: Maximum reservable bandwidth for RSVP traffic, in the range 1 
to 32000000 kbps (global pool bandwidth).

bc1 value: Reservable bandwidth in kbps on the interface, in the range 1 to 
bandwidth-value (subpool bandwidth).

Use the mpls te max-reservable-bandwidth command to configure the 
maximum reservable bandwidth.

Use the undo mpls te max-reservable-bandwidth command to remove the 
configuration.

The bandwidth in this command is configured only for MPLS traffic.

# On interface Ethernet 1/0 set maximum reservable bandwidth for MPLS TE to 
1158 kbps, and the reservable BC1 bandwidth to 200 kbps.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] mpls te max-reservable-bandwidth 1158 bc1 200 

mpls te metric value

Interface view

value: TE metric of the link, in the range 0 to 4294967295.

Use the mpls te metric command to assign a TE metric to the link.

Use the undo mpls te metric command to restore the default.

By default, the link uses its IGP metric as its TE metric.

mpls te path metric-type.

# Assign a TE metric of 20 to the link on interface Ethernet 1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] mpls te metric 20