3com MSR 20-20 참조 매뉴얼

C

HAPTER

 96: MPLS TE C

ONFIGURATION

 C

OMMANDS

mpls te path explicit-path pathname

Tunnel interface view

pathname: Name of an MPLS-TE explicit path, a string of 1 to 31 characters.

Use the mpls te path explicit-path command to associate an explicit path with 
the tunnel.

Use the undo mpls te path command to remove the association.

# Configure interface Tunnel0 to use the explicit path named path1.

<Sysname> system-view

[Sysname] interface tunnel 0

[Sysname-Tunnel0] mpls te path explicit-path path1 

mpls te path metric-type { igp | te }

MPLS view, tunnel interface view

igp: Uses IGP metric for tunnel routing.

te: Uses TE metric for tunnel routing.

Use the mpls te path metric-type command in MPLS view to specify the link 
metric type used for routing tunnels not configured with link metric type.

Use the mpls te path metric-type command in tunnel interface view to specify 
the link metric type used for routing current tunnel.

Use the undo mpls te path metric-type command to restore the default. This 
undo form is only available in tunnel interface view.

By default, TE metrics of links are used in path calculation for TE tunnels.

mpls te metric.

In MPLS view: