3com MSR 20-20 참조 매뉴얼

Use the undo mpls te reoptimization command to disable reoptimization on 
the tunnel.

Reoptimization is disabled by default.

n

mpls te auto-bandwidth adjustment, mpls te route-pinning, mpls te 
backup, and mpls te resv-style ff.

# Enable reoptimization, setting the reoptimization (automatic rerouting) 
frequency to 43200 seconds (12 hours).

<Sysname> system-view

[Sysname] interface tunnel 0

[Sysname-Tunnel0] mpls te reoptimization frequency 43200 

mpls te resv-style { ff | se }

Tunnel interface view

ff: Sets the resource reservation style to fixed filter (FF).

se: Sets the resource reservation style to shared explicit (SE).

Use the mpls te resv-style command to set the resource reservation style for the 
MPLS TE tunnel.

Use the undo mpls te resv-style command to restore the default.

The default resource reservation style is SE.

You may configure FF and SE only when the signaling protocol is set to RSVP-TE.

# Adopt the FF reservation style when setting up the CR-LSP tunnel for TE tunnel 
0.

<Sysname> system-view

[Sysname] interface tunnel 0

[Sysname-Tunnel0] mpls te resv-style ff 

mpls te retry times