3com MSR 20-20 참조 매뉴얼
1632
C
HAPTER
96: MPLS TE C
ONFIGURATION
C
OMMANDS
View
Tunnel interface view
Parameter
times: Number of tunnel setup retries, in the range 1 to 4294967295.
Description
Use the mpls te retry command to configure the maximum number of tunnel
setup retries.
setup retries.
Use the undo mpls te retry command to restore the default.
The default maximum number of tunnel setup retries is 5.
You may configure the system to attempt setting up a tunnel multiple times until it
is established successfully or until the number of attempts reaches the upper limit.
is established successfully or until the number of attempts reaches the upper limit.
Related command:
Example
# Set the maximum number of tunnel setup retries to 10.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te retry 10
mpls te route-pinning
Syntax
mpls te route-pinning
undo mpls te route-pinning
View
Tunnel interface view
Parameter
None
Description
Use the mpls te route-pinning command to enable route pinning.
Use the undo mpls te route-pinning command to restore the default.
By default, route pinning is disabled.
n
The mpls te route-pinning command cannot be used together with the mpls te
reoptimization command and the mpls te auto-bandwidth adjustment
command.
reoptimization command and the mpls te auto-bandwidth adjustment
command.
Example
# Enable route pinning.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] mpls te route-pinning