3com MSR 20-20 참조 매뉴얼

C

HAPTER

 96: MPLS TE C

ONFIGURATION

 C

OMMANDS

Tunnel interface view

label: Includes the record of labels in the route record. This keyword is not 
supported when the signaling protocol is CR-LDP. This keyword is not supported 
when the signaling protocol is CR-LDP.

Use the mpls te record-route command to enable route recording or label 
recording.

Use the undo mpls te record-route command to restore the default.

By default, route recording and label recording are disabled.

# Enable route recording on MPLS TE tunnel 0.

<Sysname> system-view

[Sysname] interface tunnel 0

[Sysname-Tunnel0] mpls te record-route 

User view

None

Use the mpls te reoptimization command to start reoptimizing all 
reoptimization-enabled TE tunnels.

# Start reoptimizing all reoptimization-enabled TE tunnels.

<Sysname> mpls te reoptimization 

mpls te reoptimization [ frequency seconds ]

Tunnel interface view

seconds: Reoptimization frequency, in the range 1 to 604800 seconds. The default 
is 3600 seconds, or 1 hour.

Use the mpls te reoptimization command to enable reoptimization on the 
tunnel.