3com MSR 20-20 참조 매뉴얼

C

HAPTER

 113: CQ C

ONFIGURATION

 C

OMMANDS

If a queue is full, any newly incoming packet will be dropped.

qos cql default-queue, qos cql inbound-interface, qos pql protocol, qos cql 
queue serving, qos cq.

# Specify the maximum packets in the queue 4 in CQL 5 to 40.

<Sysname> system-view

[Sysname] qoc cql 5 queue 4 queue-length 40 

qos cql cql-index queue queue-number serving byte-count

undo qos cql cql-index queue queue-number serving

System view

cql-index: CQL index, in the range 1 to 16.

queue-number: Queue number, in the range 0 to 16.

byte-count: Number of bytes in packets that the given queue sends in each poll, in 
the range 1 to 16,777,215 bytes. The default setting is 1500 bytes.

Use the qos cql queue serving command to set the byte-count of the packets 
sent from a given queue in each poll.

Use the undo qos cql queue serving command to restore the byte-count of 
sent packets to the default value.

By default, byte-count is 1500.

qos cql default-queue, qos cql inbound-interface, qos pql protocol, qos cql 
queue queue-length, qos cq.

# Specify byte-count of queue 2 in the CQL 5 to 1400.

<Sysname> system-view

[Sysname] qos cql 5 queue 2 serving 1400