3com MSR 20-20 참조 매뉴얼
2275
Example
# Enable the NQA client.
<Sysname> system-view
[Sysname] nqa agent enable
nqa agent max-concurrent
Syntax
nqa agent max-concurrent number
undo nqa agent max-concurrent
View
System view
Parameter
number: Maximum number of the tests that the NQA client can simultaneously
perform, in the range 1 to 50
perform, in the range 1 to 50
Description
Use the nqa agent max-concurrent command to configure the maximum
number of tests that the NQA client can simultaneously perform.
number of tests that the NQA client can simultaneously perform.
Use the undo nqa agent max-concurrent command to restore the default.
From the beginning to the end of a test, the NQA test is in the test status; from
the end of a test to the beginning of the next test, the NQA test is in the waiting
status.
the end of a test to the beginning of the next test, the NQA test is in the waiting
status.
Example
# Configure the maximum number of the tests that the NQA client can
simultaneously perform as 50.
simultaneously perform as 50.
<Sysname> system-view
[Sysname] nqa agent max-concurrent 50
nqa schedule
Syntax
nqa schedule admin-name operation-tag start-time now lifetime forever
undo nqa schedule admin-name operation-tag
View
System view
Parameter
admin-name: Specifies the name of the administrator who creates the NQA test
operation, a string of 1 to 32 characters. It is case-insensitive.
operation, a string of 1 to 32 characters. It is case-insensitive.
operation-tag: Specifies the test operation tag, a string of 1 to 32 characters. It is
case-insensitive.
case-insensitive.
now: Specifies to start the test for a test group immediately.
forever: Specifies that the test is performed for a test group forever.