3com MSR 20-20 참조 매뉴얼

Use the operation command to configure the HTTP operation type.

Use the undo operation command to restore the default.

By default, the HTTP operation type is get.

# Configure the HTTP operation type as post.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type http

[Sysname-nqa-admin-test-http] operation post 

operation interface interface-type interface-number

DHCP test type view

interface-type interface-number: Type and number of the interface that is 
performing a DHCP test.

Use the operation interface command to specify the interface to perform a 
DHCP test.

Use the undo operation interface command to remove the configured 
interface to perform the DHCP test.

By default, no interface is specified to perform a DHCP test.

Note that the specified interface must be up; otherwise, the test will fail.

# Specify the interface to perform a DHCP test as Ethernet 1/0.

<Sysname> system-view

[Sysname] nqa entry admin test

[Sysname-nqa-admin-test] type dhcp

[Sysname-nqa-admin-test-dhcp] operation interface ethernet 1/0 

password password

FTP test type view